Num'axes PROTECTION PIE1150 Gebrauchsanleitung Seite 35

Photo or video
Photo resolution
Video resolution
Multi-shot
Video length
Audio recording
PIR sensor
sensitivity
Select "ON" then press OK to set the start time and end
time of the desired working period.
Example: If "Start" is 15:00 and "End" is 18:00; each day,
the camera will work only between 15h00 (03:00 PM)
and 18h00 (06:00 PM).
Photo | Video
2 MP | 4 MP | 8 MP | 16 MP | 20 MP | 24 MP | 32 MP
Higher resolution produces better quality photos but
creates larger files that take up more of the memory card
capacity (fills up faster).
HD 720P | FULL HD 1080P | 2K
Higher resolution produces better quality videos but
creates larger files that take up more of the memory card
capacity (fills up faster).
1 photo | 2 photos | 3 photos
Programmable from 1 up to 3 photos per trigger
Default video length: 10 seconds
Programmable: 5, 10, 15, 20, 25, 30, 35, 40, 45, 50 or
55 seconds | 1, 2 or 3 minutes
ON | OFF
Allows you to activate or deactivate the audio recording
on the videos.
Low | Medium | High
With the PIR sensitivity set to High, the PIR sensor:
‒ is more sensitive to movements by smaller
subjects;
‒ offers longer detection distance;
‒ can more easily detect a difference between body
heat and outdoor temperature;
‒ can more easily trigger the camera.
In high temperature environment, subjects body heat
and environment temperature are hard to tell by the
camera, the suggested setting is high.
However, it is recommended to use low PIR sensitivity in
environments with lots of interference like hot wind,
smoke, near window, etc. This will prevent untimely
triggering.
Guide PIE1150 – Janvier 2026 – ind. A - 35/164