Num'axes PROTECTION PIE1150 Gebrauchsanleitung Seite 34

Connect App
Mode
Operating time
Displays a QR code reader on the camera screen to link it
with the mobile application.
This QR code reader does not appear if the camera is
not connected to the cellular network.
Motion detection | Time Lapse
‒ Motion detection
Select "Motion detection" then press OK to set the
desired time interval between photos/videos upon
motion detection.
This option avoids camera taking to many redundant
photos or videos.
Short PIR interval = high shooting frequency = high
battery consumption
Long PIR interval = lower shooting frequency = lower
battery consumption
Default PIR interval: 20 seconds
Programmable: 5, 10, 15, 20, 30, 40, 50 seconds | 1, 2, 3,
4, 5, 6, 7, 8, 9, 10, 15, 20, 25, 30, 35, 40, 45, 50,
55 minutes | 1 hour
Example: if the PIR interval is set to '01 minute', the
camera will wait 1 minute between photo/video
recordings when motion is detected.
‒ Time Lapse
In Time Lapse mode, the camera will capture photos or
videos automatically at a user-set time interval.
WARNING: in Time Lapse mode, the PIR sensor is
deactivated (there is no motion detection).
Select "Time Lapse" then press OK to set the desired time
interval between automatic photo/video captures.
Capture interval programmable from 00 : 00 : 00 up to
23 : 59 : 59.
Example: if capture interval is set to 00 : 30 : 00, the
camera will automatically capture photos or videos every
30 minutes.
ON | OFF
Each day, the camera can work 24 hours a day
(parameter set to OFF) or only during a user-set time
period.
Guide PIE1150 – Janvier 2026 – ind. A - 34/164