Num'axes PROTECTION PIE1150 Gebrauchsanleitung Seite 36

PIR sensor test
Infrared flash range
Camera name
Date format
Time format
Loop recording
Key tones
Format memory
card
Language
Allows you to check the PIR sensor (motion detection
sensor) is working properly.
Press the OK button to start testing.
PIR trigger: indicates the number of movement
detections
Short | Medium | Long
This parameter allows you to extend or shorten the
infrared flash range for night photos/videos.
ON | OFF
Select "ON" then press OK to assign a name to the
camera (digits/letters). If you have several devices, such
function can help you identify from which camera the
photos/videos are.
D/M/Y | M/D/Y | Y/M/D
24 hours | 12 hours
ON | OFF
When the memory card is full, the camera continues to
record photos/videos by deleting the oldest ones.
Select OFF to deactivate the cycle recording function.
ON | OFF
You can choose to hear a beep sound or not when you
press a button on the device.
No | Yes
Select "Yes" then press OK to format the memory card.
Formatting the memory card in the trail camera before
using it for the first time is strongly recommended,
especially when the card has been used in other devices.
A memory card formatted in another device may not be
compatible.
WARNING: When you format a memory card, the
operating system erases all information and files on the
card.
English | Deutsch | Français | Español | Portugués |
Nederlands | Italiano | Polski | 简体中文 | 日本語 |
Ceský | Slovenský
Guide PIE1150 – Janvier 2026 – ind. A - 36/164