Blade Replacement - Ecovacs Goat O600 Rtk Betriebsanleitung

5

Blade Replacement

WARNING
• Always power off your GOAT before operation�
• Always wear protective gloves when replacing the Blades�
• Use only the Blades manufactured by ECOVACS and new screws when assembling the Blades�
• Wipe the unwashable components with a clean and dry cloth� Please do not use cleaning sprays or other detergents�
STEPS TO REPLACE THE BLADES
1� Power off GOAT�
2� Gently turn your GOAT over on a soft surface�
3� Loosen the Screws with a screwdriver�
4� Remove the Screws and the Blades�
5� Tighten the new Blades and the Screws�
6� Make sure that the Blades can spin freely�
29 EN