General Safety Precautions; Routine Maintenance - Ecovacs Goat O600 Rtk Betriebsanleitung

5.3 Schedule Triggered Tasks
• Animal Protection Time
To protect nocturnal animals, you can set non-working time periods�
By default, this period is 19:00-7:00� Tap to adjust the time period as
needed�
• Auto Mowing Time
You can set a mowing schedule if needed� GOAT will then mow
automatically according to the schedule�
EN 26
6. Maintenance
For better performance and a longer lifespan of your GOAT, please
maintain it properly and replace worn parts as needed�

6.1 General Safety Precautions

• Always power off your GOAT before maintenance operation�
• Always wear protective gloves especially when replacing the Blades�
• Please lift your GOAT properly� Hold the handle and the head simul-
taneously when picking it up, ensuring the Blade Disc is facing down-
ward�
• DO NOT use a high pressure sprinkler because high pressure water
can enter the sealings and damage electronic and mechanical parts�

6.2 Routine Maintenance

Recommended Frequency
1
Part
AI Camera
ToF Sensor
Blades
Note: Please utilize only the original battery or that of the same model as specified
by ECOVACS�
Frequency
Wipe every 1 to 2 weeks
Wipe every 1 to 2 weeks
Replace every 4 to 6 weeks