ECOVACS GOAT O600 RTK Betriebsanleitung Seite 14

Panel Display Reads:
Display
Standing by� No task assigned�
Current Battery Level (For example, the
number shown in the image represents the
current battery level as 100%�)
STOP
GOAT is paused� Please press
continue working, or
the charging station�
ON
GOAT is working�
OTA
GOAT is undergoing OTA updates�
E and a 3-digit Error Code�
Go to the Troubleshooting section of this
manual or visit
for the meaning of the Error Code messages
and recommended solutions�
1.Start GOAT:
Press and hold [OK] for 3 seconds on GOAT and the digital tube display
will flash as below�
EN 14
Description
--> OK to
--> OK to return to
https://www�ecovacs�com/global
Note: Your GOAT will be automatically powered on when it docks at the Charging
Station�
2.Set PIN Code:
The PIN code you set for your GOAT at the very beginning is used to
prevent the device from being stolen or operated by children�
When GOAT is off map or to be powered on or reset, it will automatically
be locked� You can unlock it by entering the right PIN code�
• Set the PIN code when the display shows as below�
• Press [+] or [-] to select the PIN code numbers one by one� After the
first digit is decided, press [OK] to comfirm, and the cursor will move to
the next digit�
1� If the is flashing, please set the PIN code�
2� If the is solid, enter the previously set PIN code�
3� Once unlocked, the will disappear� If unlocking fails, the
flash again, prompting you to reset the PIN code�
Note:
•
0000 is an invalid PIN code�
•
PIN code is to be entered twice to confirm the setting�
•
If you enter the wrong numbers while setting the PIN code, the setting process
will start all over again�
•
You may change the PIN code on the App�
will