ECOVACS GOAT O600 RTK Betriebsanleitung Seite 18

5� Connect the RTK Reference Station power cable to the shorter cable
of the Charging Station and tighten the nut�
A B
6� After powering on, please wait one minute to check the indicator light
status� If the RTK Reference Station indicator remains steady blue,
the location is ideal with good signal; if it flashes, relocate the RTK
Reference Station, until you find the perfect position�
EN 18
7� After locating the perfect spot, insert the RTK Reference Station
Fixing Anchor into the ground�
Note:
•
DO NOT install the RTK Reference Station to a spot where the ground is soggy
and mushy, otherwise the pole may easily tilt, thus undermining the working accu-
racy of the RTK Reference Station�
•
The RTK Reference Station should be oriented vertically, as shown below: