Unpacking The Machine - Vevor Ms3126 Handbuch

The drum sander is delivered pre-assembled. After unpacking, the drum
sander must be installed.
Transport the machine in its packing crate to a place near its final
installation site before unpacking it. If the packaging shows signs of
possible transport damage, take the necessary precautions not to
damage the machine when unpacking. If any damage is discovered,
the carrier and/or shipper must be notified of this fact immediately to establish any
claim which might arise.
1、Needed for Setup
The following items are needed, but not included, for the setup/assembly of this
machine.
Description Qty
• Additional People........................................ 1
• Safety Glasses............................................ 1
• Cleaner/Degreaser...................... As Needed
• Disposable Shop Rags................ As Needed
2、Unpacking the machine
Inspect the machine completely and carefully, making sure that all materials, such
as shipping documents, instructions and accessories supplied with the machine
have been received.
The following is a list of items shipped with your machine. Before beginning setup,
lay these items out and inventory them. Except the main machine, you will see the
following items:
This machine is heavy. DO NOT over-exert yourself while
unpacking or moving machine—get assistance!!
ASSEMBLY