Installing The Water Tank - Vevor Css01Aw Originalanleitung

INSTALLING THE WATER TANK

Snap the water tank (26) into the water tank bracket (2) as shown in Figure 20 ;
Adjust the serpentine tube (27) so that the outlet aligns with the area where the
grinding wheel and saw blade contact, as shown in Figure 21.
NOTE : Before filling the water tank, check that the drain knob is securely locked.
As shown in Figure 25, clockwise rotation closes the valve, while counterclock
wise rotation opens it.
NOTE: After locking the drain knob, a small amount of liquid may remain in the
pipes and could seep out during subsequent adjustments. This does not indicate
that the drain lock is faulty; there is no need to continue tightening the drain knob.
- 16 -