Servo-Drive For Aventos; Ec Declaration Of Conformity - blum SERVO-DRIVE Montageanleitung

SERVO-DRIVE for AVENTOS

EC Declaration of Conformity

Julius Blum GmbH, Industriestr� 1, A-6973 Hoechst herewith declare on our own responsibility that
the product SERVO-DRIVE for AVENTOS (Z10NE050�xx, Z10NE010�xx, Z10NE020, 21xA0x1�xx,
21P5020�xx, 21P0020�xx, 21�A00L33�xx, Z10ZE000�xx) to which this Declaration refers, complies
with the following EU Directives:
EC Low Voltage Directive
EC EMV Directive
Directive for wireless systems and telecommunications equipment
The following harmonised European standards have been used to ensure proper implementation of
the requirements stipulated in the above EC Directives for the products Z10NE050�xx, Z10NE010�xx,
Z10NE020, 21xA0x1�xx, 21P5020�xx, 21P0020�xx, 21�A00L33�xx, Z10ZE000�xx:
EN 60335-1, EN 55014-1, EN 55014-2, EN 61000-3-2, EN 61000-3-3,
EN 300440-2, EN 301489-1, EN 301489-3
The following standard has also been applied for the products Z10NE050�xx, Z10NE010�xx and
Z10NE020:
EN 60950
The above products have been tested by:
TÜV Rheinland Product Safety GmbH; Prüfstelle für Produktsicherheit Dresden
Wilhelm-Franke-Straße 66; D-01219 Dresden
Certificate number: Q 60030496
The CE marking was added in 10�
Before start-up, furniture conformity to Machine Directive 2006/42/EC must be confirmed�
Höchst, 08�09�2010
Dipl�-Ing� Herbert Blum, Managing Director
www�blum�com
EN
2006/95/EC
2004/108/EC
1999/05/EC
29