Servo-Drive For Aventos; Distribution Cable Installation; Drive Unit Adjustment; Drive Unit Assembly - blum SERVO-DRIVE Montageanleitung

SERVO-DRIVE for AVENTOS

Distribution cable installation

AVENTOS HF / -HS / -HL / -HK

Drive unit adjustment

AVENTOS HF / -HS / -HL

Drive unit assembly

NOTE
✓ ✓
➢ Before SERVO-DRIVE for AVENTOS assembly, the lift mechanisms
must be set so that the front remains open in different positions�
➢ The telescopic arm and/or lever arm must be in the completely open
position for drive unit installation�
➢ If required, attach the opening angle stop only after drive unit installation
and before the reference run�
AVENTOS HK
EN
11