Service; Appliance-Specific Safety Instructions For Tackers - Parkside PAT 4 A1 Originalbetriebsanleitung

CAUTION! RISK OF EXPLOSION! Never charge
non-rechargeable batteries!
Protect the rechargeable battery from heat, for example
from continuous exposure to sunlight, fire, water and
moisture. There is a risk of explosion.

6. Service

a) Have your power tool serviced by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the power
tool is maintained.
Appliance-specific safety instructions for tackers
■
Always check that the power tool contains staples.Careless
handling of the tacker can lead to unexpected ejection of staples,
which could cause injuries.
■ Never aim the power tool at yourself or other people in
the vicinity.Unintended triggering will cause a staple to be shot
out, which can lead to injuries.
■ Do not activate the power tool until it is pressed firmly
against the workpiece.If the power tool is not in contact with
the workpiece, the staple can rebound off the fastening point.
■ Disconnect the power tool from the mains or battery if a
staple becomes jammed in the power tool.If the tacker is
connected to a power source, it could be unintentionally activat-
ed while removing a jammed staple.
■ Be careful when removing a jammed staple.The system may
be live and the staple could be forcefully ejected while you are
attempting to unblock the jam.
■ Never use this tacker for fastening electrical cables.It is not
suitable for the installation of electrical lines, can damage the in-
sulation of electrical cables and thus cause electrical shocks and
increase the risk of fire.
PAT 4 A1
│
GB 9 ■