Mounting and Connection Instructions AXS4Secure
5. Mark AXS4Secure with the right mouse
button. Select "Service functions".
6. Open tab "Date/Time timezone".
Write "PC Date/time" to panel.
7. Open tab "Change network configuration".
Read "Fixed IP settings" from panel.
If a change it if required, deactivate "Get IP address via DHCP", change entry, write to panel.
11.3.3 Further start-up with IQ MultiAccess
Launch IQ MultiAccess on the PC/laptop and carry out the programming.
You can find detailed information on programming in the user manual "IQ MultiAccess".
37