State Of Delivery; Mounting - Honeywell AXS4Secure Montage, Anschluss, Anleitung

28
4.

State of delivery

The AXS4Secure incl. power supply is com-
pletely assembled in the housing ZG10.
Open housing:
Push the cover upwards until it stops,
flip the cover forward and
remove the cover upwards.
5.

Mounting

The distance to the ceiling, cable channels or
similar must be at least 3 cm.
Ê
Attach screw on the wall for the attachment
point above and hang housing.
Ë
Screw housing on the two lower attach-
ment points.
Cable entries on top and bottom:
If required, press the pre-punched cable en-
tries inwards into the housing.
Cable entries on top
Mounting and Connection Instructions AXS4Secure
Computer/
Connection PCB
AXS4Secure
Space for battery
Brass strip (common support point for
the protective earth and cable shields)
110
Cable entries on bottom
Cover contact
Power suppy/
Charger unit
12 VDC / 18 Ah
Item no. 013970
Battery
connection lead
PE connector
for cover
Cable entry
Space for
distributor
16-pin
050019
PE
310
110