Trigger Hold-Up Alarm With Disarming; Clear Hold-Up Alarm - Honeywell Accentic Bedienungsanleitung

Operating Instructions mifare/DESFire EV1 reader "Accentic" with/without keypad
6.4.5.3

Trigger hold-up alarm with disarming

Activate the "disarm" key
0....9
Enter the hold-up code
ID Hold the data carrier in the reading range
With authorization: Hold-up alarm is triggered and the system is disarmed
Acknowledgement:
6.4.5.4

Clear hold-up alarm:

A) Activate the corresponding control function
F
Activate the "F" key
0....9
Enter the function/macro number
3
Confirm with "OK"
0....9
Enter PIN
and
or
Hold the data carrier in the reading range
ID
or
B) Press the button in the EU conventional.
Authorization
Ready
5 sec.
(green)
Disarmed
Armed
(yellow)
possible with door release
possible without door release
No authorization
Dis-
armed
29
possible
no.