Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6.8. Checking diodes
WARNING!
*
Never connect the test leads to a source of voltage when
you have the selected the DIODE function and plugged the
test leads into the V//Hz-terminal.
*
Be sure that the circuit under test has all power removed
and that any associated capacitors are fully discharged
before you make a resistance measurement.
This function lets you check diodes and other semiconductors
for opens and shorts. It also lets you determine the forward
voltage for diodes. You can use this function when you need to
match diodes.
-
-64-
+
Werbung
Inhaltsverzeichnis
