PeakTech 2180 Bedienungsanleitung Seite 43

2. Introduction
The Multimeter is heavy-duty and rugged hand-held Multimeter
that will give you confidence and peace of mind in your every
measuring job. Please read these operating instructions very
carefully before commencing your measurements.
* Data Hold Function - freezes the display so you can keep the
measured value there even after you disconnect the probes.
* MIN / MAX HOLD to display the minimum and maximum
measured value within a measurement series.
* Relative value measurement function: The relative value
measurement function allows the measurement and display of
signals with respect to a defined reference value.
* Auto polarity operation
* Overload and Transient protection
* Backlight
* Low Battery indicator appears when you need to replace the
batteries.
* Beeper sounds tones for continuity function
* Auto power off
-42-