Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6.7. Temperature measurements
Warning!
To avoid electric shock, disconnect both test probes from any
source of voltage before making a temperature measurement.
1. If you wish to measure temperature set the function switch to
the °C- or °F-range
2. Insert the temperature-adaptor to the input sockets COM
and V/Ω/Hz (-)
3. Insert the thermocouple to the temperature-adaptor.
4. Touch the Temperature probe head to the part whose
temperature you wish to measure. Keep the probe touching
the part under test until the reading stabilizes (about
30 seconds).
5. Read the temperature in the display. The digital reading
will indicate the proper decimal point and value.
-63-
Werbung
Inhaltsverzeichnis
