Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6.5. Capacitance measurements
Warning !
To avoid electric shock, disconnect power to the unit under test
and discharge all capacitors before taking any capacitance
measurements. Remove the batteries and unplug the line cords.
1. Set the function switch to the CAP position.
2. Plug the black test lead into your meter's COM-terminal and
the red test lead into your meter's V//Hz-terminal.
3. Touch the test leads to the capacitor to be tested. The
display will indicate the proper decimal point value.
-61-
Werbung
Inhaltsverzeichnis
