Inserting/Removing The Battery Pack; Setting The Rotational Direction; Speed Control - Parkside Performance Passp 20 Li C4 Bedienungsanleitung/Originalbetriebsanleitung

˜ Setting the rotational
direction
Fig. E
NOTICE! Risk of product damage!
m
u Only operate the rotational direction
s itch [ 2 ] when the product has
stopped.
NOTE
u The directional information in this
section should be interpreted as
meaning that the user is positioned
behind the product.
Set the rotational direction s itch
o
to one of the positions
Position of
the rotational
direction
i [ 2 ]
Left
Middle
Right
˜ S i i
WARNING! Risk of injury due
m
to unintentional continuous
operation of the product!
u Before inserting the battery pack
check that the on o s itch
works properly and returns to the
OFF position when released.
Switching on
1. Insert the battery pack
Inserting removing the battery pack .
2. Set the rotational direction (see

Setting the rotational direction .

[ 2 ]
Rotational
direction
Clockwise
On o s itch [ ]
locked
Counter-clockwise
[ 7 ] ,
[ ]
[ 7 ] (see
3. Select the speed level (see "Selecting
the speed level .
4. Press and hold the on o s itch
S i i
1. Release the on o s itch
2. Wait until the product has stopped
before placing it down.
3. When taking a break: Push the
rotational direction s itch
middle position. This prevents the
product from being switched on
accidentally.
4. Remove the battery pack
product if you are leaving the product
unattended or if you have nished
working.
˜ Speed control
Progressively controlling the speed:
o
Apply gentle or stronger pressure on
the on o s itch
Pressure
Gentle
Strong
˜ LED work light
NOTE
u Improve visibility in poorly lit areas:
This product is equipped with a
LED ork light
immediate working area.
As soon as the product is switched
o
on The LED ork light
immediately.
[ ] .
[ ] .
2 ] [ to the
7 ] [ from the
[ ] .
Speed
Low
High
[ ] to illuminate the
[ ] switches on
GB/IE 43