Parkside Performance PASSP 20 Li C4 Bedienungsanleitung/Originalbetriebsanleitung Seite 37

c Keep children and bystanders
away while operating a power
Distractions can cause you to
lose control.
Electrical safety
a Power tool plugs must match the
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with earthed (grounded) power
Unmodi ed plugs and matching
outlets will reduce risk of electric
shock.
b Avoid body contact with earthed
or grounded surfaces, such as
pipes, radiators, ranges and
i There is an increased
risk of electric shock if your body is
earthed or grounded.
c Do not expose power tools to rain
i i
a power tool will increase the risk of
electric shock.
d Do not abuse the cord. Never use
the cord for carrying, pulling or
unplugging the power tool. Keep
cord away from heat, oil, sharp
i
entangled cords increase the risk of
electric shock.
e When operating a power tool
outdoors, use an extension cord
i
cord suitable for outdoor use reduces
the risk of electric shock.
f If operating a power tool in a
damp location is unavoidable, use
a residual current device (RCD)
reduces the risk of electric shock.
36 GB/IE
Water entering
Damaged or
Use of a
Use of an RCD
Personal safety
a Stay alert, watch what you are
doing and use common sense when
operating a power tool. Do not use
a power tool while you are tired
i
inattention while operating power tools
may result in serious personal injury.
b Use personal protective
i A
i Protective equipment
such as dust mask, non-skid safety
shoes, hard hat, or hearing protection
used for appropriate conditions will
reduce personal injuries.
c Prevent unintentional starting.
E i
position before connecting to power
i
po er tools ith your nger on the
switch or energising power tools that
have the switch on invites accidents.
d Remove any adjusting key or
wrench before turning the power
A wrench or a key left
attached to a rotating part of the
power tool may result in personal
injury.
e Do not overreach. Keep proper
footing and balance at all
i This enables better control
of the power tool in unexpected
situations.
f Dress properly. Do not wear loose
clothing or jewellery. Keep your
hair, clothing and gloves away
i
jewellery or long hair can be caught in
moving parts.
g If devices are provided for the
connection of dust extraction and
collection facilities, ensure these are
of dust collection can reduce dust-
related hazards.
i i A moment of
i i ‑
i i
Carrying
Loose clothes,
Use