Charging The Battery Pack; Operation - Parkside Performance Passp 20 Li C4 Bedienungsanleitung/Originalbetriebsanleitung

˜ Charging the battery pack
NOTICE! Risk of damage to the
m
7 ] [
u Do not expose the battery pack
to direct sunlight for long periods
and do not place it on a radiator.
Observe an ambient temperature of
max. 0 C.
NOTE
u If the battery pack
allow it to cool down before
charging.
1. Remove the battery pack
product.
2. Push the battery pack
charging slot of the charger
3. Connect the charger
outlet.
4. After charging: Disconnect the
charger [ ] from the socket-outlet.
5. Pull the battery pack
charger [ . ]
Control LEDs on the charger
Green Red
Lights —
up
— Lights
up
— Flashes
Flashes Flashes
42 GB/IE
!
[ 7 ]
[ 7 ] is still warm,
7 ] [ from the
7 ] [ into the
[ . ]
to a socket-
[ ]
[ 7 ] out of the
Meaning
Fully charged
Stand-by mode (no
battery pack
7 ] [
inserted
Charging
Battery pack 7 ] [ is
overheated
Battery pack 7 ] [ is
defective
˜ Operation
˜ I i
battery pack
WARNING! Risk of injury due to
m
i i
Only insert the battery pack
u
the product is fully prepared for use.
NOTICE! Risk of property damage
m
and damage to the product!
An incorrect battery pack can
u
damage the product and the battery
pack.
Inserting the battery pack
1. Push the battery pack
guide into the battery pack holder
2. Ensure the battery pack
audibly in place.
Removing the battery pack
1. Press the release button
battery pack .
7 ] [
2. Pull the battery pack
battery pack holder
˜ Selecting the speed level
Press [ ] to choose between
o
speed levels.
The selected speed level is indicated
o
on the speed level display
Level Max.
‑
rotation
speed
660
min
1
2 1,250
min
1
3 1,550
min
1
i
‑
once
[ 7 ]
[ 7 ] along the
[ 5 ]
[ 7 ] clicks
[ ] on the
7 ] [ out of the
.
[ 5 ]
[ ] .
Max. T
impact
rate
500 1 0 N m
min
1
1,500 00 N m
min
1
1,900 1 N m
min
1
.