Before Installation - Harvia Concept R Installation Und Betriebsanleitung

2. BEFORE INSTALLATION

• The sauna heater should always be transported in an upright position only.
• The sauna heater can be lifted and moved by supporting it from the outer casing.
• Remove the protective film from the sauna heater before use.
Checklist for installation of the sauna heater
□ Check that the heater is intact. Do not use a defective sauna heater. Report any damage in transit
to the supplier.
□
The sauna heater is suitable in terms of power and type for the sauna room in question. The sauna
volume values must not be exceeded or fallen short of (5. Technical information) (7.2. Sauna heater
power)
□
The supply voltage is suitable for the sauna heater.
□
The sauna heater installation location meets minimum safety distances (6.1. Safety distances)
□
The location of the temperature sensor/overheat protector is sauna heater-specific. Make sure that
the sensor is installed according to the instructions.
□ Make sure that the sauna heater stones are loaded according to the instructions.
□
If accessories are to be installed, follow the product-specific instructions for installation and use.
□
Make sure that the control unit is compatible with the sauna heater. You can check the compatibility
of the latest control unit models on Harvia.com
□
Please keep this manual for future reference.
EN
7