Installing The Control Unit And Sensors - Harvia Concept R Installation Und Betriebsanleitung

6.3. Installing the control unit and sensors

Do not position the supply air vent so that the air flow cools the heat sensor.
• The control unit comes with detailed instructions on how to mount it on the wall.
• Install the heat sensor as shown in the picture. If the sauna heater is installed further than 150 mm
from the wall, the sensor must be installed on the ceiling.
Figure 3a. Installing the heat sensor on the wall
Figure 3b. Installing the heat sensor on the ceiling
100 mm 100 mm
EN
13