Installation In The Vehicle; Teaching The User; Adjustment Options / Features - Thomashilfen Hercules Prime R129 Gebrauchsanweisung

Instructions for Use – Hercules Prime R129

6.3.1 Installation in the vehicle

Hercules Prime is placed in the desired position on the car seat. The backrest of
the Hercules Prime is continuously adjusted to the back angle of the car seat. The
3-point safety belt is first passed through the upper green belt guide (Fig. 4), then
through the belt guides located in the pelvic area (Fig. 5+6). Both belt guides must
be used in the pelvic area. The belt is then locked in the buckle with the belt tongue
(Fig. 7) and the belt run must be checked for twisting.
Tip: Installation in the vehicle is easier if you unfold the folded Hercules Prime after
placing the seat on the vehicle seat.
Attention: If the positioning seat is used on a front seat with an airbag, the airbag
must be deactivated.
You can also find detailed instructions for use in videos on the Internet:
www.thomashilfen.de/hercules-prime-r129-montage

6.4 Teaching the User

The user is taught how to use this device by trained staff who will reference these
Instructions for Use.
Trained staff should install the seat in the vehicle with the user and adjust the seat to
the measurements of the actual user.
The user has to be shown all of product's functions as well as how to install and
remove it from the vehicle.

7. Adjustment Options / Features

7.1 Folding
Hercules Prime can be folded for easy, space-saving transport.
7.1.1 Unfolding
Release the red eccentric levers on both sides of the seat to fold the seat open.
(Fig. 8) Then secure the seat in the desired position. Attach the enclosed pelvic pads.
Put the pelvic pads over the side guides with the padded side facing inwards. The
pelvic pad is fixed to the outside and inside of the sheet metal with hook and loop
fasteners. (Fig. 9)
44
2025-11