Teaching The User; Adjustment Options / Features; Accessories - Thomashilfen Octopus Gebrauchsanweisung

Instructions for Use – Octopus
Fig. 2: Threading the head section
Fig. 3: Threading the foot section
Fig. 4: Clicking in metal buckles
Fig. 5: Tightening the metal buckles

Teaching the User

The user is taught how to use this device by trained staff who will reference these
Instructions for Use.
Trained staff should install the product in the vehicle with the user and adjust the seat
to the measurements of the actual user.
The user has to be shown all of product's functions as well as how to install and
remove it from the vehicle.

Adjustment Options / Features

Attaching and adjusting the 7-point seat vest
The 7-point seat vest is connected to the basic back part.
The straps are threaded through the buckles on the back of the basic back part. Then
the chest size of the vest is reduced or increased by these straps..
Fig. 6: Threading a strap
Fig. 7: Tightening the strap
Warning: The standard three-point safety belt must always be used for the safe and
legally permitted transport of persons in the car!

Accessories

Belt extension
The belt extension consists of a belt for the horizontal fixation of the system (one
buckle) and a belt for the extension of the buckles (two buckles).
The lower buckles of the base back are adjusted to the maximum length and placed
on the seat. The two buckles are now connected to the corresponding counterpart of
the belt extension. Then the buckles, with the crotch strap, are pulled under the com-
plete car seat and clicked into place on the back with the buckles of the headrest.
Now the small belt (one buckle) is placed in front of the base back and the crotch
belt. The belt is connected to the back of the car seat. The belt is then tightened as
deeply as possible on the backrest.
19
2021-04