Standard Equipment
Seat and back with integrated seat depth adjustment; continuous back angle adjust-
ment with quick release lever; breathable upholstery with flame-retardant cover fab-
ric: height-adjustable head cushion, back cushion, pelvic cushion, seat cushion, crotch
pad; 5-point belt including shoulder pads; belt guide for 3-point vehicle belt (can be
used on the right or left); prepared mounting options for all accessories
Putting into Service
• Carefully remove the transport protection and the packaging.
• Keep the packaging material and small parts out of the reach of children to prevent
swallowing or choking.
• The product is delivered folded. Note the remarks for folding found in the section
on adjustment options.
Installation in the vehicle
Hercules XL is placed in the desired position on the car seat. The backrest of the
Hercules XL is continuously adjusted to the back angle of the car seat. The 3-point
safety belt is first passed through the upper red belt guide (fig. 3), then through the
belt guides located in the pelvic area (fig. 4+5). Both belt guides must be used in the
pelvic area. The belt is then locked in the buckle with the belt tongue (fig. 6) and the
belt run must be checked for twisting.
Tip: Installation in the vehicle is easier if you unfold the folded Hercules XL after pla-
cing the seat on the vehicle seat.
Attention: If the positioning seat is used on a front seat with an airbag, the airbag must
be deactivated.
Teaching the User
The user is taught how to use this device by trained staff who will reference these
Instructions for Use.
Trained staff should install the seat in the vehicle with the user and adjust the seat to
the measurements of the actual user.
The user has to be shown all of product's functions as well as how to install and
remove it from the vehicle.
2021-04
Instructions for Use – Hercules XL
35