Thomashilfen Hercules Prime R129 Gebrauchsanweisung Seite 53

Instructions for Use – Hercules Prime R129
8.15 Stabilizing bow
The stabilizing bow is pushed into the receptacle under the seat plate from behind.
(Fig. 43) Loosely screw the 2 enclosed screws (1 on each side) into the holder so that
the stabilizing bracket can still be moved. (Fig. 44)
Determine the required position of the stabilising bar: To do this, place the seat in the
vehicle and guide the stabilising bar between the seat surface and the backrest of
the vehicle seat. The backrest of the Hercules Prime must have as much contact as
possible with the backrest of the vehicle. Mark the desired position at the junction of
the stabilisation bar and the receptacle under the seat plate.
Take the Hercules Prime out of the vehicle again and fix the stabilising bar at the
marked position.
The stabilizing bow can also be used upside down, depending on the vehicle seat. To
do this, mount the bracket with the bend either up or down. (Fig. 45)
8.16 Incontinence seat cover
The incontinence seat cover is placed on the seat cushion (Fig. 46), then the small
hook straps are attached to the back of the back cushion. The long strap is passed
around the backrest and fastened in the plastic buckle. The seat cushion is now
pushed forward and fastened under the seat cushion with the front hook strap.
It is possible to insert other commercially available absorbent pads into the inconti-
nence seat pad to increase the absorption capacity if required.
53
2025-11