ZAMEL exta life ROP-22 Bedienungsanleitung Seite 35

is carried out in the switch on / switch of mode. If in the configuration tab the 'switch on time'
parameter is set, then a receiver starts operation in time mode with the defined time. Time is
adjusted in the range from 1 sec. to 18 hrs.
8. The receivers can be paired individually – press the "PAIR" push-button and assign a new
name to a receiver. In case a larger number of receivers are paired, they are automatically
saved with default names.
9. After pairing, it is possible to add an individual name and icon (from the icon base) to each
ROP-22 receiver.
10. Only after pairing the receivers can be used in the system in a further configuration process
(assigning a user, a category, building scenes, time and logic functions).


CAUTION: In order to register receivers successfully in the system (mainly if there is a
larger number of receivers), it is necessary to activate the device pairing method several
times and pair the ones that were found.



