ZAMEL exta life ROP-22 Bedienungsanleitung Seite 29

5. After the LED is switched off, in < 5 sec. press shortly the transmitter's push-button that is as-
signed to channel 2 in time mode, and that we want to programme time for.
6. The STATUS LED starts flashing red – it means time is measured for channel 2 (OUT-2).
7. After the time we want to assign to a selected push-button is finished, press shortly the trans-
mitter's push-button again.
8. The STATUS LED flashes orange to signal time has been programmed correctly.
Time assigned to a particular push-button can be changed only by repeating the programming pro-
cedure.
REMOTE SOFTWARE UPDATE
• ROP-22 receiver is equipped with a built-in bootloader, which allows for a remote software
change by means of the EXTA LIFE application. Software update is possible only in case of
receivers paired with a controller and can be realized only by an authorised user (an admin-
istrator). It is required to connect the EXTA LIFE controller to the Internet to carry out the
update.
• The current ROP-22 software update is displayed in the "Configuration details" tab. The
'Update' push-button is backlit, in case there is a new software version. By pressing this
push–button, information is sent to a controller, which enters the receiver into the software
update mode. The latest software is sent to a receiver by means of a controller. If the update
has been completed successfully, such a message is sent to a controller from a receiver and,
additionally, it is signalled in the mobile application. The update can be carried out only by an
authorised user (an administrator).
• If, for any reason, the software update has not completed successfully, then the receiver is
marked as 'a receiver with an update error' by the controller. This receiver does not have its
original functionality any more. Then, if the "Configure" option for this receiver is selected by
means of an application, there is an immediate change to the "Configuration details" screen
with a backlit 'Update' field. Software update starts just after pressing this button.
   