Technical Data - Zamel Exta Life Rop-22 Bedienungsanleitung

TECHNICAL DATA

Nominal supply voltage:
Nominal frequency: 50/60 Hz
Nominal power consumption:
Transmission:
Transmission way:
Coding:
Operating range:
Maximum transmit power:
Optical signalling
(transmission / programming):
Number of paired buttons:
Current receiver's mode information:
Operating modes in cooperation
with EXTA LIFE system transmitters:
Operating modes in cooperation
with EXTA LIFE controller:
Number of external inputs:
Cooperation with push-buttons*:
Operating modes for external inputs**:
Time adjustment range:
Number of output channels:
Relay contact parameters:
Maximum output load:
Number of terminal clamps:
Casing mounting:
Operating temperature range:
Protection degree:
Protection class:
Dimensions:
Weight:
* switch type configured by means of the EXTA LIFE mobile application
** operating mode dependent on selected switch type
230 VAC
50 / 60 Hz
0,45 W – standby
0,8 W – one channel operation
1,2 W – two channel operation
radio – ISM band 868 MHz
two-way - 9600 bps
algorithm based on 128-bit key
up to 330 m in the open area
ERP<20 mW
yes – RGB LED
maximum 96 pairs
yes – in the EXTA LIFE mobile application
switch on /switch off, bistable, monostable, time
switching on, switching off, time
2
monostable (push-buttons), bistable
switching on, switching off, bistable, monostable, time
1 sec. ÷ 18 hrs.
2
2 x NO 5A / 250 VAC (voltage output)
incandescent and halogen lighting sources – 750 W
LEDs – 60 W
CFL lamps – 250 W
6 (wires with cross-section up to 2,5 mm2)
Ø60 mm junction box
-10 ÷ +55 °C
IP20
II
47,5 x 47,5 x 20 mm
0,039 kg