ZAMEL exta life ROP-22 Bedienungsanleitung Seite 22

DESCRIPTION
Radio flush receiver ROP-22 is the final element of the EXTA LIFE system, which allows for an
independent control of two devices / 230 V AC circuits. It is especially dedicated to control light-
ing fittings equipped with incandescent and halogen lamps, LEDs and CFL lamps. This receiver
cooperates also with light sources powered by toroidal and electronic transformers. Due to its
two independent outputs, it cooperates with two-section lighting or it controls independently two
lighting circuits. The current mode of a receiver is always shown in a mobile application due to
a two-way communication between a receiver and a controller. This method of communication al-
lows for changing the adjusted parameters of a receiver and adding transmitters remotely (without
a physical access to a receiver). Implemented frame encoding algorithm ensures control secu-
rity. ROP-22, apart from a controller, can be simultaneously operated by the EXTA LIFE system
transmitters. A larger number of transmitters can be added to a receiver which, in turns, enables
an independent control from several places. The device is designed for (surface and flush) junc-
tion box installation. By means of a controller the additional configured wired inputs increase the
control functionality. The receiver has also an implemented function of a remote software update
by means of the controller.
FEATURES
• nominal supply voltage 230 V AC,
• compatible with a controller and EXTA LIFE system transmitters,
• 2 output channels (230 V AC outputs),
• two-way transmission – current output mode indication in the application,
• programmable output mode after power supply is switched on,
• 2 programmable external inputs,
• connection possibility of monostable or bistable switches,
• 4 operation modes in cooperation with transmitters (switch on / switch off, bistable, monosta-
ble, time),
• 2 operation modes in cooperation with a controller (switch on / switch off, time)
• independent time for radio transmitters, a controller and an external input,
• independent time for each output,
• possibility of remote software update,
• dedicated to control lighting circuits,
• mounting in Ø60 mm junction box.
APPEARANCE
Signalling diode - RGB
(receiving / transmission / mode)
Input terminals
Programming push-button
Output terminals
Power supply terminals