ZAMEL exta life ROP-22 Bedienungsanleitung Seite 31


It is also possible to assign remotely a transmitter to a receiver by means of a receiver. To do it
choose the "Assign transmitter" option from the receiver (channel) menu.
The following cases can occur during time mode programming:
 The „Switch on" and „Switch off" buttons are the same – switching on and switching off a re-
ceiver before the adjusted time is over, is realised by means of the same push-button (it is, e.g.,
push-button "1" of P-457/4 remote control).
 The „Switch on" and „Switch off" buttons are different – the "switch on" button realizes only the
receiver's (channel) switching on function, and the "switch off" button realizes only the switch-
ing off function before the adjusted time is over.
 The "Switch off" button has not been defined – the situation is analogical as in point .




