Maintenance And Servicing - Vevor Rc-9001 Originalanleitung

make sure Rotation Switch is still in Forward position. WARNING! Do not
retrieve cable with Rotation Switch set in Reverse position.
3. Keep one hand on cable. The cable can get caught while being
retrieved.
4. Continue retrieving cable until you can pull cable by hand. Release foot
from Foot Switch. WARNING! Do not pull cable from drain while cable is
still rotating. The cable can whip around, causing serious injury.
5. Place Rotation Switch in OFF position, dry your hands, unplug machine.
6. Release Tension Knob tension and pull remaining cable from drain by
hand and feed into Drain Cleaner. If needed, change cutting tool and
continue cleaning.

Maintenance and Servicing

Procedures not specifically explained in this manual must be
performed only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Turn the Rotation Switch of the tool to its "OFF" position and unplug the
tool from its electrical outlet before performing any inspection,
maintenance, or cleaning procedures.
TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:
Do not use damaged equipment. If abnormal noise or vibration occurs,
have the problem corrected before further use.
Cleaning Drain Cleaner Cables
1. Thoroughly flush Drain Cleaner cables with clean water after every use.
Doing so will help prevent the build-up of sediment and any drain cleaning
chemicals still in the cable.
2. Once cables have been flushed, carefully tip the Drain Cleaner forward
to empty out any remaining debris.
3. Once the cable is clean and dry, pull the cable from the drum.
- 23 -