VEVOR RC-9001 Originalanleitung Seite 15

Arrow Cutter
Cutter Tool
Arrow Cutter (2 pieces) Starting tool; ideal for cutting and scraping
Boring Bulb Cutter
C-Cutter
Spade Cutter
NOTICE: If the cause of the obstruction is unknown, use the Boring Bulb
Cutter to explore the obstruction and, if possible, retrieve a piece to
inspect. Once you can see the cause of the obstruction, select the
appropriate tool for the job. Run the smallest available tool through the
blockage to allow the backed up water to flow and carry away the debris
as the drain is cleaned.
Once the drain is flowing, more appropriate tools can be used on the rest
of the blockage.
Keep in mind that the largest tool used should be no bigger than the
drain's inside diameter, minus an inch.
If properly used, the Drain Cleaners and assorted Drain Cleaner
Accessories will not damage a drain that is in good condition and properly
designed, constructed, and maintained.
However, if the drain is in poor condition or has not been properly
designed, the drain cleaning work may damage the drain. If possible,
visually inspect the drain's quality before operation.
Boring Bulb Cutter
Applications
Starting tool; ideal for removing loose objects
Finishing tool; ideal for grease stoppages and cleaning
pipe walls.
Finishing tool; used for scraping the inside edges of
pipes.
C-Cutter
- 14 -
Spade Cutter