VEVOR RC-9001 Originalanleitung Seite 10

have a proper outlet installed by a qualified electrician.
Grounded Tools: Tools with Three Prong Plugs
1. Tools marked with "Grounding Required" have a three wire cord and
three prong grounding plug. The plug must be connected to a properly
grounded outlet. If the tool should electrically malfunction or break down,
grounding provides a low resistance path to carry electricity away from the
user, reducing the risk of electric shock. (See 3-Prong Plug and Outlet.)
2. The grounding prong in the plug is connected through the green wire
inside the cord to the grounding system in the tool. The green wire in the
cord must be the only wire connected to the tool's grounding system and
must never be attached to an electrically "live" terminal. (See 3-Prong
Plug and Outlet.)
3. The tool must be plugged into an appropriate outlet, properly installed
and grounded in accordance with all codes and ordinances. The plug and
outlet should look like those in the preceding illustration. (See 3-Prong
Plug and Outlet.)
Ground Fault Circuit Interrupter (GFCI)
Your machine is equipped with a ground fault circuit interrupter (GFCI),
which protects you against shock if a short circuit should occur. Check that
the receptacle is properly grounded and test the GFCI before each use.
1. Plug the GFCI Power Plug into a
outlet.
3-Prong Plug and Outlet
- 9 -
grounded, 120 VAC electrical