VEVOR RC-9001 Originalanleitung Seite 27

or when
Foot Pedal
is pressed.
Motor does
not operate
or the Foot
Pedal ticks.
The
"Forward/
Reverse"
Switch
Does not
work.
Parts Lists and Diagrams
PLEASE READ THE FOLLOWING CAREFULLY
The manufacturer and/or distributor has provided the parts list and
assembly diagram in this manual as a reference tool only. Neither the
manufacturer or distributor makes any representation or warranty of any
kind to the buyer that he or she is qualified to make any repairs to the
product, or that he or she is qualified to replace any parts of the product.
In fact, the manufacturer and/or distributor expressly states that all repairs
and parts replacements should be undertaken by certified and licensed
technicians, and not by the buyer. The buyer assumes all risk and liability
arising out of his or her repairs to the original product or replacement parts
thereto, or arising out of his or her installation of replacement parts thereto.
touching Power Cord or
Drain Cleaner.
5. Faulty GFCI unit.
Pneumatic Foot Pedal
may have a leak.
The centrifugal switch
requires the motor to
come to a complete
stop before it will allow
the direction of the
motor to be changed.
qualified technician; Replace
Motor.
4. Dry cord and unit.
5. Electrician must Replace
Power Cord with GFCI.
Check for leaks in air line leading
from Foot Pedal. Check for tears
and holes in Foot Pedal. Replace
if needed.
Move the "Forward/Reverse"
Switch to the "Off" position and
allow the motor to stop before
changing from "Forward" to
"Reverse" or vice versa.
- 26 -