Tool Set Up - Vevor Rc-9001 Originalanleitung

Operating Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section
at the beginning of this manual including all text under
subheadings therein before set up or use of this product.

Tool Set Up

TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Turn the Rotation Switch of the tool to its "OFF" position and unplug the
tool from its electrical outlet before assembling or making any adjustments
to the tool.
TO PREVENT SERIOUS INJURY:
DO NOT OPERATE WITH ANY GUARD DISABLED, DAMAGED, OR
REMOVED.
Wear ANSI-approved safety goggles, heavy-duty LEATHER work
gloves, and other appropriate protective equipment when setting up
your Drain Cleaner. For extra protection from chemicals and bacteria
on the machine and in the work area, we recommend wearing latex,
rubber or other liquid barrier gloves under the heavy-duty work gloves.
Before use, inspect gloves to be sure they are free of defects or loose
sections that could be caught in the Drain Cleaner. Rubber soled, non-slip
shoes can help prevent slipping and electric shock, especially on wet
surfaces.
TO PREVENT SERIOUS INJURY FROM ELECTRIC SHOCK,
TWISTED/BROKEN CABLES, CHEMICAL BURNS, INFECTIONS AND
OTHER CAUSES AND PREVENT DRAIN CLEANER DAMAGE:
Before each use, inspect Drain Cleaner and correct any problems.
1. Once the Drain Cleaner is assembled, check the device and cutters for
any signs of wear and damage. If necessary, replace worn or damaged
parts prior to using the drain cleaning machine. Dull or damaged cutting
tools can lead to binding, cable breakage, and slow the drain cleaning.
2. Verify Drain Cleaner is unplugged and inspect the power cord, Ground
Fault Circuit Interrupter (GFCI) and plug for damage. If the plug has
- 16 -