VEVOR RC-9001 Originalanleitung Seite 6

instructions to operate the power tool. Power tools are
dangerous in the hands of untrained users.
5. Maintain power tools. Check for misalignment or binding of
moving parts, breakage of parts and any other condition that
may affect the power tool's operation. If damaged, have the
power tool repaired before use. Many accidents are caused by
poorly maintained power tools.
6. Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
7 . Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into account the
working conditions and the work to be performed.
Use of the power tool for operations different from those
intended could result in a hazardous situation.
Service
Have your power tool serviced by a qualified repair person using
only identical replacement parts.
This will ensure that the safety of the power tool is maintained.
Drain Cleaner Safety Warnings
1. Maintain labels and nameplates on the tool. These carry important
safety information. If unreadable or missing, contact Harbor Freight Tools
for a replacement.
2. Wear ANSI-approved safety impact eye goggles and heavy duty
LEATHER work gloves when using the Drain Cleaner. Never grasp a
rotating cable with a rag or cloth glove. Using personal safety devices
reduce the risk for injury. Safety impact eye goggles and heavy work
gloves are available from Harbor Freight Tools.
3. Avoid unintentional starting.
Prepare to begin work before turning on the tool.
4. Do not force the Drain Cleaner. This tool will do the work better and
safer at the speed and capacity for which it was designed.
5. Maintain a safe working environment. Keep the work area well lit.
Make sure there is adequate surrounding workspace. Always keep the
work area free of obstructions, grease, oil, trash, and other debris. Do not
use a power tool in areas near flammable chemicals, dusts, and vapors
- 5 -