Kärcher BD Trike BAT Betriebsanleitung Seite 34

Operating Instructions
Close the threaded plug on the fresh-
water tank.
Working in recycling mode (optional)
For cleaning slightly to normally dirty floors.
Detergent and setting-up times are
reduced in recycling mode.
When the fresh-water tank is empty and
the dirty-water tank is full, set the rotary
knob to recycling mode.
Information:
i
Dirty water is filtered before being
reused.
Recycling mode requires a feed pump
which conveys the fresh and recycled water
to the brushes.
If the fresh water goes directly into the dirty-
water tank, recycling mode can be actuated
at the start of the cleaning process.
34
Recommended detergents
Application:
Maintenance cleaning
(also for alkaline-sensitive
floors)
Cleaning greasy dirt
deposits
Basic cleaning
(stripping) alkaline-
resistant hard floor
coverings
Basic cleaning
stripping linoleum
Sanitary cleaner
Disinfectant cleaner
Detergents are available from specialist
outlets.
Setting the water flow rate
Set the maximum water flow rate with
the control knob.
Control the water flow rate by
depressing the metering pedal.
Simultaneous depression of the drive
and metering pedals ensures that
metering is speed-dependent.
English
Detergents
RM 745
RM 746
RM 69 ES ASF
RM 69 ASF
RM 752
RM 754
RM 25 ASF
RM 732