Kärcher BD Trike BAT Betriebsanleitung Seite 31

English
Non-maintenance-free batteries
One hour before the end of the charging
process, add distilled water, ensuring
that the acid level is correct. Batteries
are identified accordingly. At the end of
the charging process all cells must gas.
Risk of injury!
!
If a discharged battery is refilled
with water, acid may escape!
When handling battery acid, wear
protective goggles and follow the
instructions to prevent injury and damage
to clothing.
Immediately wash off any acid splashes on
the skin or clothing using plenty of water.
Caution!
Use only chemically pure battery acid
(in compliance with VDE 0510),
concentration 1.28 kg/l.
Refill the batteries with distilled or
demineralised water only (VDE 0510).
Do not use additives (so-called enhancing
agents), otherwise any warranty will be
invalidated.
Recommended batteries
Manufacturer Description
Kärcher
order no.
Hagen 24 V PzS 175 (5)
6.654-070* low-maintenance
Capacity: 175 Ah
Voltage: 4 x 6 V
Hagen 24 V GiV 160 (5)
6.654-071 maintenance-free
Capacity: 160 Ah
Voltage: 4 x 6 V
DETA 24 V GiV 180 DTP
6.654-130 maintenance-free
Capacity: 180 Ah
Voltage: 4 x 6 V
DETA 24 V GiV 160 DT
6.654-089 maintenance-free
Capacity: 160 Ah
Voltage: 4 x 6 V
SONNEN- 020 8517 405
SCHEIN* low-maintenance
Capacity: 175 Ah
Voltage: 4 x 6 V
SONNEN- 021 9216 000
SCHEIN maintenance-free
Capacity: 160 Ah
Voltage: 4 x 6 V
* not approved for the BAT package variant
Caution!
Use only maintenance-free batteries
with package battery chargers.
Operating Instructions
31