Changing The Detect-Dial-Tone Setting; To Change The Detect-Dial-Tone Setting - HP LaserJet 3015 Faxhandbuch

Changing the detect-dial-tone setting

Normally, the device begins dialing a fax number immediately. If you are using the device
on the same line as your telephone, turn on the detect-dial-tone setting. This prevents the
device from sending a fax while someone is on the telephone.
The factory-set default for detect dial tone is On for France and Hungary, and Off for all
other regions/countries.

To change the detect-dial-tone setting

1. Press
2. Use the
3. Press
4. Use the
5. Use the
56 Chapter 3 Faxing (advanced)
/ .
MENU ENTER
< or the > button to select Fax setup, and then press
> once to select Fax Send setup, and then press
< or the > button to select Detect dial tone, and then press
< or the > button to select On or Off, and then press
/ .
MENU ENTER
/ .
MENU ENTER
/
MENU ENTER
/ .
MENU ENTER
.
ENWW