Inserting A Dial Prefix; To Set The Dial Prefix - HP LaserJet 3015 Faxhandbuch

Inserting a dial prefix

A dial prefix is a number or group of numbers that are automatically added to the beginning
of every fax number you enter at the control panel or from the software. The maximum
number of characters for a dial prefix is 50.
The default setting is Off. You might want to turn this setting on and enter a prefix if, for
example, you have to dial a number such as 9 to get a telephone line outside of your
company telephone system. While this setting is activated, you can dial a fax number
without the dial prefix by using manual dial. For instructions, see

To set the dial prefix

1. Press
2. Use the
3. Press the
4. Use the
5. Use the
6. If you selected On, use the alphanumeric buttons to enter the prefix, and then press
MENU
ENWW
/ .
MENU ENTER
< or the > button to select Fax setup, and then press
> button once to select Fax Send setup, and then press
< or the > button to select Dial Prefix, and then press
< or the > button to select On or Off, and then press
/ . You can use numbers, pauses, and dialing symbols.
ENTER
Using manual dial.
/ .
MENU ENTER
/ .
MENU ENTER
/ .
MENU ENTER
/ .
MENU ENTER
Inserting a dial prefix 53