Werbung
Quicklinks
Werbung
Verwandte Anleitungen für HP LaserJet 3055
Inhaltszusammenfassung für HP LaserJet 3055
- Seite 1 HP LaserJet 3052/3055 Lea Esto Primero...
- Seite 2 The information contained in this document is subject to change without notice. See the electronic User Guide for more regulatory information. The only warranties for HP products and services are set forth in the Trademark Credits express warranty statements accompanying such products and services.
- Seite 3 Prepare the location. Place the all-in-one on a sturdy, level surface Regulate the environment. Do not place the all-in-one in direct in a well-ventilated area. Make sure that the air vents are not blocked sunlight or in an area that has abrupt temperature and humidity and all doors can open freely.
- Seite 4 Package contents. 1) automatic document feeder (ADF) input tray; 2) HP LaserJet 3052/3055 all-in-one; 3) power cord; 4) fax cord (HP LaserJet 3055 all-in-one only); 5) print cartridge; Contenu du carton. 1) bac d'alimentation automatique (BAA) ; 2) multifonction HP LaserJet 3052/3055 ; 3) cordon d'alimentation ;...
- Seite 5 Remove all packing tape. Check the all-in-one thoroughly and Locate the all-in-one parts. 1) tray 1; 2) priority input slot; 3) output remove all the packing tape. bin; 4) automatic document feeder (ADF) input tray; 5) ADF output bin; 6) control panel;7) cartridge-door release; Retirer tous les rubans adhésifs d'emballage.
- Seite 6 Install the control-panel faceplate (if not already installed). Note: The connector. control panel for the HP LaserJet 3055 all-in-one is shown. 1) Align the control-panel faceplate with the all-in-one. 2) Beginning in the center of the faceplate and working outward, press the faceplate until it snaps into place.
- Seite 7 Il pannello di controllo include automatico di documenti (ADF). 1) Aprire il coperchio dell'ADF. le seguenti aree: 1) controlli del fax (solo HP LaserJet 3055 all-in-one); 2) Allineare le due linguette del vassoio di alimentazione alle 2) pulsanti alfanumerici;...
- Seite 9 6) Place the media in the tray, and then adjust the media guides until Install the output bin support. Insert the pin on one side of the support they are flush with the media. Note: Do not fan the media before into the hole in the all-in-one.
- Seite 10 Install the print cartridge. 1) Press the cartridge-door release to open 2) Remove the print cartridge from its packaging, and then rock the the print-cartridge door. cartridge gently five or six times. 3) Bend the plastic tab at the end of the cartridge.
- Seite 11 5) Hold the print cartridge by the handle and insert it into the all-in-one. CAUTION: If toner gets on your clothing, wipe the toner off with a clean 6) Close the print-cartridge door. cloth, wash the items in cold water, and air dry. Hot water or heat from a dryer sets the toner in the fabric.
- Seite 12 HP, qu'il s'agisse de cartouches neuves ou reconditionnées. multifonction. 2) Connectez l'autre extrémité du cordon d'alimentation En effet, comme il ne s'agit pas de produits HP, HP n'a aucun contrôle à une prise de courant mise à la terre. Remarque : N'utilisez que le sur leur conception ou leur qualité.
- Seite 15 Tip: If the all-in-one has no power and no lights are lit on the control Set the control-panel-display language and location (if necessary). If panel, make sure that the power cord is attached securely to both the prompted by the control panel, select your language and location. all-in-one and a power outlet.
- Seite 16 Test the hardware setup by printing a configuration report. Tip: If the page that prints is totally blank, remove the print cartridge, 1) Press . 2) Use the < or the > button to select Reports, and then make sure that the sealing tape is removed (see step 10), reinstall the print cartridge, and then try printing the page again.
- Seite 17 Test the copier by using the automatic document feeder (ADF). Tip: If the copy job produces a blank page, make sure that the original 1) Load the configuration report that you just printed print-side up into is loaded print-side up and that no jams exist in the ADF and paper the ADF input tray.
- Seite 19 Windows Complete the hardware setup. If you are using the all-in-one as a Connect to a Windows computer. The all-in-one software supports a standalone copier, the setup is complete. If you are using the all-in- full-featured installation for Windows 2000 and XP. Only print and scan one as a standalone fax, go to step 22 to complete the setup.
- Seite 20 Windows XP o Windows 2000. 3) Seleccione Instalar el el programa de instalación no se inicia automáticamente, haga clic en software de HP LaserJet. 4) En el Asistente de conexión de la Iniciar, haga clic en Ejecutar, haga clic en Examinar, seleccione el impresora, seleccione un tipo de conexión.
- Seite 21 Windows Windows 5) For USB connections, the software prompts you to connect the all- 6) Follow the onscreen instructions to install the software. When in-one to a computer. For network connections, connect the network prompted, select the Typical installation type. cable to the network before proceeding.
- Seite 22 Assistant starts, follow the instructions. running on the computer. 3) Insert the software CD-ROM into the CD drive. 4) In the CD folder, double-click the HP All-in-One Installer icon. Connecter le multifonction à un ordinateur Macintosh (Mac OS X 5) Suivez les instructions affichées sur l'écran, puis cliquez sur V10.3 et 10.4 uniquement) 1) Connectez le câble USB (A/B) au...
- Seite 23 Fax setup (HP LaserJet 3055 all-in-one only). If you installed the all- Tip: If the utility does not run automatically, access it in the program in-one software, the HP LaserJet Fax Setup Utility (Windows) or Setup group. Assistant (Mac) automatically runs. The software prompts you to set the time, date and fax header.
- Seite 24 If you are using the all-in-one as a standalone fax, complete the 3) Use the < or the > button to select Time/Date. Press . 4) Use following steps: 1) Press . 2) Use the < or the > button to <...
- Seite 25 6) Complete one of the following: a) For the 12-hour clock, use the < 7) Use the alphanumeric buttons to enter the current date. Use two or the > button to move past the fourth character. Select for a.m. or digits to specify the month, day, and year.
- Seite 26 10) Use the alphanumeric buttons to enter your fax number and your 8) Use the < or the > button to select Fax setup, then press . 9) Use company name or header, and then press . Note: The maximum <...
- Seite 28 SCANEAR A http://www.register.hp.com para recibir actualizaciones gratuitas para programas o en Programas y, a continuación, haga clic en HP. Haga el dispositivo multifuncional e información que sea relevante para clic en HP LaserJet 3050/3052/3055/3090 multifuncional y después usted, incluyendo notificaciones de actualizaciones de software o en Escanear.
- Seite 29 Windows 4) Select Allow me to scan by pressing the Scan To button on the all- in-one..5) Move the destinations from the PC window to the All-in- one window. 6) Click Update. See the online User Guide for complete information.
- Seite 31 Congratulations! The all-in-one is ready to use. See the online User Clearing ADF jams. 1) Open the ADF door. 2) Lift up the pickup roller. Guide or use the HP ToolboxFX software (Windows 2000 or XP only) 3) Carefully remove the jammed media without damaging the all-in- to solve problems.
- Seite 32 Preventing streaks and spots on scans and copies. 1) Open the Clearing print jams. 1) Unplug the all-in-one. 2) Remove the print scanner lid. 2) Clean the scanner glass and the scanner strip with a cartridge. 3) Remove all media from tray 1. 4) Remove all jammed soft sponge or cloth that has been moistened with a nonabrasive media.
- Seite 34 © 2005 Hewlett-Packard Development Company, L.P. www.hp.com *Q6502-90903* *Q6502-90903* Q6502-90903...