Making An Extension Telephone Available To Receive Faxes; To Make An Extension Telephone Available To Receive Faxes - HP LaserJet 3015 Faxhandbuch

Making an extension telephone available to receive faxes

With this setting turned on, you can alert the device to pick up the incoming fax call by
pressing 1-2-3 sequentially on the telephone keypad (in tone-dial mode only). The default
setting is On. Turn this setting off only if you use pulse dialing or if you have a service from
your telephone company that also uses the 1-2-3 sequence. The telephone company
service does not work if it conflicts with the device.

To make an extension telephone available to receive faxes

1. Press
2. Use the
3. Use the
4. Use the
5. Use the
selection.
ENWW
/ .
MENU ENTER
< or the > button to select Fax setup, and then press
< or the > button to select Fax Recv. setup, and then press
< or the > button to select Extension Phone, and then press
< or the > button to select On or Off, and then press
Making an extension telephone available to receive faxes
/ .
MENU ENTER
/ .
MENU ENTER
/ .
MENU ENTER
/ to save your
MENU ENTER
61