Changing The Default Resolution Setting; To Change The Default Resolution Setting - HP LaserJet 3015 Faxhandbuch

Changing the default resolution setting

Resolution, in dots per inch (dpi), affects the quality of faxed documents. It also affects the
transmission speed as a higher resolution produces a larger file, which requires more time
to transmit. The factory-set default resolution setting is Fine.
Use this procedure to change the default resolution for all fax jobs to one of the following
settings:
● Standard: This setting provides the lowest quality and the fastest transmission time.
● Fine: This setting provides a higher resolution quality than Standard that is usually
appropriate for text documents.
● Superfine: This setting is best used for documents that mix text and images. The
transmission time is slower than Fine but faster than Photo.
● Photo: This setting produces the best images, but greatly increases the transmission
time.

To change the default resolution setting

1. Press
2. Use the
3. Use the
4. Use the
5. Use the
6. Press
For instructions about changing the resolution for the current fax job only, see
Note
resolution for the current fax
ENWW
/ .
MENU ENTER
< or the > button to select Fax setup, and then press
< or the > button to select Fax Send setup, and then press
< or the > button to select Def. Resolution, and then press
< or the > button to change the resolution setting.
/ to save the selection.
MENU ENTER
job.
MENU
Changing the default resolution setting
/ .
ENTER
/ .
MENU ENTER
/ .
MENU ENTER
To adjust the
35