Redialing Manually; To Redial Manually - HP LaserJet 3015 Faxhandbuch

Redialing manually

If you want to send another document to the last fax number that was dialed, use the
following procedure to redial manually. If you are trying to resend the same document that
you sent the first time, wait until the automatic redial attempts have stopped or until you
have stopped them yourself. Otherwise, the recipient might get the fax twice: once from the
manual redial attempt and once from one of the automatic redial attempts.
To stop the current redial attempt for a fax, or to cancel all pending, automatic redial
Note
attempts for a fax, see
redial

To redial manually

1. Load the document into the automatic document feeder (ADF) input tray or onto the
2. Press
3. Press
30 Chapter 2 Faxing (basic)
Canceling a fax
settings.
flatbed scanner (HP LaserJet 3030 all-in-one or HP LaserJet 3380 all-in-one only).
/ .
REDIAL PAUSE
/ . The device redials the last number that was dialed and attempts to send
FAX SEND
the fax.
If you are scanning from the flatbed scanner (HP LaserJet 3030 all-in-one or HP
LaserJet 3380 all-in-one only), select YES when Send from glass? 1=Yes 2=No
appears, and then press
job. To change redial settings, see
/ .
MENU ENTER
Changing the
ENWW