Sartorius PMA.Vision VIS1X Installationsanleitung Seite 25

Deutsch
a = Up to three letters and/or numbers or blank (not critical to safety)
b = Up to two letters and/or numbers or blank (not critical to safety)
c = Up to five letters and/or numbers or blank (not critical to safety)
Specific Conditions of Use
1. The PMA.Evolution shall only be used with the YCO-14Z Ex-Link Converter
2. The protective ground connectors on the PMA.Evolution and the YCO14-Z Ex-Link Converter shall be connected
2
together using a potential equalisation conductor with a cross-sectional area of at least 4 mm .
3. The CAT6 cable used between the PMA.Evolution and the YCO14-Z Ex-Link Converter shall be obtained from
Sartorius.
Equipment Ratings:
YCO14-Z Ex-Link Converter
Associated intrinsically safe apparatus for connection to Class I, Division 1, Groups C and D hazardous
(classified) locations in accordance with drawing 2021459, Associated Intrinsically Safe for connection to
Class I, Zone 1, Group IIB hazardous (classified) locations in accordance with drawing 2021459. Ambient
temperature range 0°C to 40°C
PMA.Evolution EVO1Xab-c
PMA.Evolution LAB1Xab-c
Intrinsically Safe for Class I, Division 1, Groups C and D, hazardous (classified) locations in accordance
with drawing 2021459, Intrinsically Safe for Class I, Zone 1, Group IIB hazardous (classified) locations in
accordance with drawing 2021459. Temperature class T4 at an ambient temperature of 0°C to 40°C.
FM Approved for:
Sartorius Lab Instruments GmbH & Co. KG
Goettingen, Germany
To verify the availability of the Approved product, please refer to www.approvalguide.com
FM Approvals HLC 5/13 «PeopleSoft_Project_ID»
Page 2 of 3
Installationsanleitung VIS1X 25