Herunterladen Inhalt Inhalt Diese Seite drucken

Certificate Of Compliance - Sartorius PMA.Vision VIS1X Installationsanleitung

Farbmischwaagen für den einsatz in explosionsgefährdeten bereichen der zone 1
Vorschau ausblenden Andere Handbücher für PMA.Vision VIS1X:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

CERTIFICATE OF COMPLIANCE

HAZARDOUS (CLASSIFIED) LOCATION ELECTRICAL EQUIPMENT
This certificate is issued for the following equipment:
YCO14-Z
Ex-Link
Converter
AIS / I / 1 / CD
Ta = 0°C to 40°C
[I / 1] /
[AEx ib] IIB Ta = 0°C to 40°C
Specific Conditions of Use
1. The
YCO14-Z Ex-Link
2. The protective ground connectors on the PMA.Evolution and the YCO14-Z
together using a potential equalisation conductor with a cross-sectional area of at least 4 mm
3. The
CAT6
cable used between the PMA.Evolution and the YCO14-Z
Sartorius.
PMA.Evolution EVO1Xab-c
IS / I / 1 / CD / T4 Ta = 0°C to 40°C
I / 1 / AEx ib IIB / T4 Ta = 0°C to 40°C
a = Up to three letters and/or numbers or blank (not critical to safety)
b = Up to
two
letters and/or numbers or blank (not critical to safety)
c = Up to five letters and/or numbers or blank (not critical to safety)
Specific Conditions of Use
1. The PMA.Evolution shall only be used with the
2. The protective ground connectors on the PMA.Evolution and the YCO14-Z
together using a potential equalisation conductor with a cross-sectional area of at least 4 mm
3. The
CAT6
cable used between the PMA.Evolution and the YCO14-Z
Sartorius.
4. The enclosure of the PMA.Evolution is non-conducting and may generate an ignition-capable level of electrostatic
charges under certain extreme conditions. The user shall ensure that the equipment is not installed in a location
where it may be subjected to external conditions that might cause a build-up of electrostatic charges on non-
conducting surfaces, additionally; cleaning of the equipment should be done
PMA.Evolution LAB1Xab-c
IS / I / 1 / CD / T4 Ta = 0°C to 40°C
I / 1 / AEx ib IIB / T4 Ta = 0°C to 40°C
To verify the availability of the Approved product, please refer to www.approvalguide.com
FM Approvals HLC 5/13
24
Installationsanleitung VIS1X
FM Approvals
1151 Boston Providence Turnpike
P.O. Box 9102 Norwood, MA 02062 USA
T: 781 762 4300 F: 781-762-9375 www.fmapprovals.com
Converter shall only be used with the PMA.Evolution.
YCO14-Z Ex-Link
«PeopleSoft_Project_ID»
Page 1 of 3
Ex-Link
Converter shall be connected
2
.
Ex-Link
Converter shall be obtained from
Converter
Ex-Link
Converter shall be connected
2
.
Ex-Link
Converter shall be obtained from
only with a damp cloth.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis