Sartorius PMA.Vision VIS1X Installationsanleitung Seite 20

to EC-Type Examination Certificate No. FM14ATEX0084X
13 Description of Equipment or Protective System:
The YCO14-Z is a dedicated device providing power and data to the PMA.Evolution EVO1X or LAB1X
weighing units
communications. The YCO14-Z
dedicated potential equalization connection is provided on both the PMA.Evolution and the YCO14-Z
Ex-Link Converter. Power and data connections between the YCO14-Z and the PMA.Evolution are
made via a multi-conductor
Electrical ratings
Um = 250 V
14 Specific Conditions of Use:
1. The YCO14-Z Ex-Link
2. The protective ground connectors on the PMA.Evolution and the YCO14-Z
connected together using a potential equalisation conductor with a cross-sectional area of at least 4 mm
3. The CAT6 cable used between the PMA.Evolution and the YCO14-Z
Sartorius.
15
Essential Health and Safety Requirements:
The relevant EHSRs that have not been addressed by the standards listed in this certificate have been identified
and assessed in the confidential report identified in item 8.
16 Test and Assessment Procedure and Conditions:
This EC-Type Examination Certificate is the result of testing of a sample of the product submitted, in
accordance with the provisions of the relevant specific standard(s), and assessment of supporting
documentation. It does not imply an assessment of the whole production.
Whilst this certificate may be used in support of a manufacturer's claim for CE Marking, FM Approvals Ltd
accepts no responsibility for the compliance of the equipment against all applicable Directives in all
applications.
This Certificate has been issued in accordance with FM Approvals Ltd's ATEX Certification Scheme.
17
Schedule Drawings
A list of the significant parts of the technical documentation is annexed to this certificate and a copy has
been kept by the Notified Body.
18 Certificate History
Details of the supplements to this certificate are described below:
Date
THIS CERTIFICATE MAY ONLY BE REPRODUCED IN ITS ENTIRETY AND WITHOUT CHANGE
FM Approvals Ltd. 1 Windsor Dials, Windsor, Berkshire, UK. SL4 1RS
T: +44 (0) 1753 750 000 F: +44 (0) 1753 868 700 E-mail:
F ATEX 020 (Apr/14)
20 Installationsanleitung VIS1X
SCHEDULE
(FM14ATEX0085X). All signal outputs
Ex-Link
CAT6 cable.
Converter shall only be used with the PMA.Evolution (FM14ATEX0085X).
Description
Original Issue.
atex@fmapprovals.com www.fmapprovals.com
to the PMA.Evolution
Converter is housed within non-metallic enclosure. A
Ex-Link
are available in RS232
Ex-Link Converter shall be
Converter shall be obtained from
Page 2 of 2
2
.